HOT MELT Asphalt Pavement Crack Repair sealant
Product Description
We all know that water is the most destructive element to our pavements. If it rained and snowed
everywhere but on our roads and bridges, 90 percent of highway and street work would be
eliminated. Since that is not likely to happen any time soon, we need to prevent water intrusion
into our pavements. Filling or sealing pavement cracks to prevent water from entering the base
and subbase will extend the pavement life by three to five years.
Our “Ning-way” brand road Crack Sealant is a kind of hot applied road sealing Material. It is made
Of matrix asphalt, high polymer, stabilizer and other additive. It is used for sealing the cracks and
Pit slots of the asphalt concrete pavement.
How to applied our hot applied road crack sealant?
1. Close the traffic:
Set construction signs according to technical specifications in accordance with
road maintenance.
2. Clean the crack: Clean the cracks by cutter and blower.
3.Heat the road crack sealant by crack filling machine:
Put the crack sealant into heat container and heat it to 120~150°C. . Keep mixing
and stirring while heating, and keep the temperature below 170°C.
4.Fill the cracks and seal the pothole.
5.Open the traffic: The crack sealant can be solidified in 1 hour, you can open
the traffic in 1 to 2hour after the construction.
Product Categories : Road Sealant
