Water-based curing agent KS-3C02

Water-based curing agent KS-3C02

Water-based Curing Agent Product Description:

ks-3C02 is an alkaline silicate concrete curing agent. This product is a colorless liquid that forms a transparent film after curing. The materials used are stable, non-toxic, safe and environmentally friendly.Iron Green Metal Floor Hardener,.

Product Usage:

Curing Agents can further increase the surface density and hydrophobicity, and the water retention of the original water base can be increased by 50 to 70%. After curing, the concrete surface has a protective effect. Applicable to the pavement, various floors, prefabricated beams, piers and all kinds of planes, large areas of indoor and outdoor concrete casting surface of the Curing Agents and protection.
Curing Agents product advantages:
1, reduce the concrete surface shrinkage and cracks.Metal Floor Hardener.
2, make the cement more fully hydration, and react with the free calcium and magnesium ions in the concrete to form high hardness, improve the surface strength and wear resistance of the ground.
3, The construction is convenient, spraying can be carried out during the whole protection period.
4, no longer need wet sacks, sand and polyethylene and other curing materials.
5, The usual ambient temperature and working conditions can be quickly conjunctiva in 60-120 minutes.
6, high quality, high efficiency, saving water resources and labor.
7, non-toxic, odorless, no pollution, no burning
8, does not affect the other paving construction, such as paint, paint, etc.Sky Blue Metal Floor Hardener.

Material characteristics:

25°C, specific gravity 1.10-1.15 (kg / L)
Color: colorless
Conjunctiva color: colorless and transparent
Conjunctival time: 1-2 hours
Theoretical dosage: 15-20 square kilograms
Water-based Curing Agent Construction Instructions:
1, the material should be fully mixed before use.
2, the final surface of the calendered concrete surface is sprayed with a curing agent uniformly on its surface.
3, After the calendering, the construction time is about 24 to 48 hours (depending on the ambient temperature and humidity at that time). The basic requirement is that there is no free water on the surface. If you do not have spraying equipment, you can also use soft brush or roller construction, construction should be careful to avoid damage to the concrete surface.
4, after the template is removed, the facade concrete immediately spray water curing agent.Red Metal Floor Hardener.
5. The concrete surface to be treated shall be free of traces of oil, paint, etc. so as not to affect the adhesion of the water-based curing agent to the concrete.
storage:
Store in a cool, dry place away from direct sunlight.
note:
If the curing agent is sprayed within 24 hours after application, the floor may have white crystals that can be dissolved by washing with water. After the water is dried, the curing agent can be reapplied again.Silicon Carbides.
package:

ks-3C02: 25 kg/barrel, 50 kg/barrel

Contact us if you need more details on Cement Curing Agent. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Concrete Curing Agent、Reactive Curing Agent. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Curing Agent > Water-based Curing Agent